The temperature of the PET preform mold is precisely controlled to prevent warping. Deformation is an important factor, therefore the use of a hot runner mold is recommended. The tool temperature should be high, otherwise there will be poor surface gloss and difficulties in demolding. What are the m

PET preform mould requires high precision, the difficulty lies in the thin wall of the test tube, the concentricity of the mold is difficult, the output of the test tube is relatively large, 8 cavities, 16 cavities, 32 cavities are relatively common, so the steel material of the mold should be selec

As PET preform moulds have the advantages of light weight, good toughness, easy formability and low cost, more and more plastics are used to replace glass in modern industry and daily products, especially in optical instrument and packaging industry. development is particularly rapid. What are the p

PVC compound for pipe fitting is polymerized from polyvinyl chloride monomer (VCM). PVC material has the characteristics of non-toxic, anti-aging, acid and alkali resistance, and is very suitable for chemical pipelines. The mixture composed of a certain amount of solid additives (without plasticizers) added to the raw materials of polyvinyl chloride is called rigid polyvinyl chloride (UPVC).

PVC compound for pipe fitting cannot be hot-melted, and its sealing performance is not good; it is a rigid pipe material and has poor shock resistance; it often contains free chlorine, and its value itself is thermally stable.

In modern life, plastic building drainage pipes, water pipes and sewage pipes have been widely used, and polyethylene pipes are becoming the development direction of plastic pipes. PVC compound for pipe fitting was first used by Germany in 1936, and the world's first plastic water pipeline was laid in Britain in 1939. Since then, plastic pipes have developed rapidly, constantly replacing metal pipes or other traditional pipes. In the 1970s, the standardization and serialization of PVC compound for pipe fitting was realized internationally, which greatly promoted the production and application of plastic pipes in various countries.