| Mold Model | oil bottle preform mold |
| Mould core and cavity | s316 steel |
| Runner Type | Hot runner |
| Preform material | PET |
| Cavity Quantity | According to your need |
| Preform volume and neck size | According to your requirement |
| Mold Base | 4CR13 Steel |
| Mould Design software | UG, PROE, CAD |
| Scope of Application | water bottle |
| Mould life | 5 to 8millons shots |
| Delivery time | 50-65days |
| Certification | TS16949, ISO |
| Origin | China |
Product Feature
1. PET preform mold cavity from 1 up to 72.
2. Electric control system with simulating stretch testing improve yield rate.
3. International standard screw neck, imported nitrided steel with high hardness is of long usage.
4. Advanced hot runner design and even heating temperature make sure the high quality of plastic products.
5. At least 8 million guarantee.
Advantages Of Hot Runner PET Bottle Preform Mould
1. No drainage opening material is used in our hot runner system, which greatly saves the cost of raw material as we do not need cutting drainage openings and scrap and at the same time which make sure our hot runner system has a nice and precise shape.
2. Using our hot runner system, the products will be more sophisticated, and quality can be controlled easier.
3. Our hot runner system shortens the time of release to improve the production efficiency. Comparing to cold runner system, the production efficiency could be increased 30% to 50%.
4. Reduced injection pressure and products internal stress etc..